Respirable Crystalline Silica (RCS), concrete, stone, brick cutting
COSHH assessment
A COSHH assessment for respirable crystalline silica (rcs), concrete, stone, brick cutting on a UK construction site: what it does to people, how it gets into them, the controls that stop it, the PPE for what is left, and what to do when it goes wrong. Copy it into your assessment and change what does not fit your job.
Hazards to health
Silicosis (irreversible fibrosis), lung cancer (IARC Group 1), COPD, kidney disease, scleroderma. WEL 0.1 mg/m3 8-hr TWA (EH40/2005), under HSE review for reduction.
Routes of exposure
Inhalation
Control measures
- Eliminate where possible, pre-cast or factory-cut units.
- Water suppression on all cutting/chasing/grinding (continuous flow, not mist).
- On-tool extraction with M-class minimum, H-class for enclosed work.
- No dry sweeping, use M/H-class vacuum or wet methods.
- Segregate cutting areas, downwind of others.
- Air monitoring against WEL.
- CAR/COSHH health surveillance with lung function (annual spirometry).
PPE for what is left
- FFP3 disposable mask or P3 half-mask (face-fit tested per INDG479), Safety goggles, Coveralls (Type 5/6) for prolonged work, Hearing protection where combined with cutting noise
Emergency procedures
- Move to fresh air.
- Decontaminate by HEPA-vac before removing PPE, never blow down with compressed air.
- Seek medical attention if breathing difficulty.
- Report to occupational health and update health surveillance record.
Questions people ask
Do I need a COSHH assessment for respirable crystalline silica (rcs), concrete, stone, brick cutting?
If the substance is hazardous to health and your work exposes people to it, yes. The Control of Substances Hazardous to Health Regulations 2002, regulation 6, require a suitable and sufficient assessment before the work starts, with the significant findings recorded if you employ five or more. The safety data sheet is an input to the assessment, not a substitute for it. Guidance, not legal advice.
What is the difference between a safety data sheet and a COSHH assessment?
The data sheet is the manufacturer describing the product in general. The assessment is you describing how your people use it on your job: how much, how often, for how long, in what ventilation, with what controls. Two firms using the same tin can have very different assessments.
What is a WEL?
A Workplace Exposure Limit, the maximum airborne concentration averaged over a reference period, set in HSE document EH40. For this substance: WEL 0.
Is PPE enough?
No. COSHH puts PPE last: eliminate the substance, substitute for something less harmful, control at source with ventilation and enclosure, then organise the work to reduce exposure, and only then PPE for what is left. An assessment that jumps straight to gloves and a mask is the kind an inspector questions. Guidance, not legal advice.
How often should it be reviewed?
When the product, the method, the quantities or the people change, if there is any sign the controls are not working, and at least every year or so regardless. Health surveillance may be required where exposure could cause an identifiable disease, such as dermatitis or occupational asthma.
The COSHH assessment writes itself
Pick the substance in the SiteLynx RAMS editor and the COSHH assessment fills in with the hazards, controls and PPE, alongside the HAVS and noise assessments for the tools you chose. Signed on site on a phone. 14 days free.
Start free trial